Renal Injury Creatinine Test Strips Clinical Chemistry Analysis Uric Acid Meter

Renal Injury Marker Creatinine Test Strips Clinical Chemistry Analysis Uric Acid Meter

CE and cFDA approved Creatinine Test Strip

Intended Use
Creatinine Test Strips (Dry chemical method) is suitable for quantitative determination of creatinine concentration in whole blood or serum in vitro. Creatinine is the metabolic end product of creatine phosphate in human muscles, which is mainly cleared through glomerular filtration. Under normal circumstances, the serum creatinine level in the human body remains basically stable. When the kidneys are damaged, the normal excretion of creatinine in the body is blocked, and serum creatinine levels are elevated. Therefore, serum creatinine concentration can reflect the glomerular filtration rate. It is clinically used as a routine item for the monitoring and analysis of renal function. At present, there are enzymatic methods and chemiluminescence methods commonly used to detect creatinine content in blood samples.

Use the kit with Dry Chemical Analyzer(manufactured by Lumigenex): LP-100, Total F, Total M, Total P

1. Directions For Testing
1. Read the instruction carefully before use.
2. Insert the IC card that matches the lot number on the test strips.
3. Take out the test strip from the aluminum foil bag or drying cylinder, and insert it into the analyzer until the end cannot go any further.
4. When ‘ADD SAMPLE’ appears on the display, use a capillary blood collector or pipet to apply 20L of whole blood or serum sample to the test strip sample well.
5. In about 4 minutes, the results will appear on the display automatically on the analyzer.
6. Calibrator and quality control instructions: The test strip adopts IC card calibration mode, and the analyzer automatically reads batch-specific calibration data from the IC card without user calibration.
7. Take out and discard the test strip, Do not use it again.

2. Main Components
1. Single test card is composed of a card shell and a test strip. The test strip is composed of a diffusion layer, a blood filter layer, an auxiliary blood filter, and a reaction layer(It contains various enzymes, creatinine amidohydrolase, the content is about 13.5U; creatine amidinohydrolase, the content is about 4.7U; sarcosine oxidase, the content is about 1.5U; peroxidase, the content is about 3.5U; 4 -Aminoantipyrine, the content is about 58.0ug).
2. IC card:1pc/kit (contains lot-specific test strip information).
3. Instructions for use.
4. Traceability: Biochemical analyzer: Beckman AU680, kit: SHINO-TEST Cygnus Auto CRE.
※Do not exchange products with different batch numbers.

3. Specification

4. Application Scope

1drop of fingernail blood(20μl), get creatinine results within 4 minutes.

5. CE and cFDA approved Creatinine Test Strips Features and Advantage​

• Store at room temperature, no need for a refrigerator
• Cost-effective 
• Accurate and reliable results, comparable to wet chemistry machine
• Easy to operate
• Only need very less blood: 20ul
• Rapid: can get the result within 4 minutes

6. More Pictures